Properties Of IDEMITSU PS Flame Retardant Grade (effective from 27 April 2011)
For enquiries click here.
DOC NO : CQ-QAS-004-00-N-03
|
ITEM |
TESTING MODE |
RESIN |
FLAME RETARDANT V0 |
FLAME RETARDANT
V2 |
|||||
|
GRADE |
|
NS-221 |
NS-253 |
NS-280 |
|
NS-100 |
|||
|
TYPE/ |
Good Light Resistant |
Light Resistance |
Good Flow |
High Flow |
High Strength |
High Heat Resistant |
|||
|
Non-Decabromo |
Non-Decabromo |
Non-Decabromo |
Non-Decabromo |
Non-Decabromo |
Non-Decabromo |
||||
|
Specific Gravity |
|
- |
1.15 |
1.15 |
1.16 |
1.15 |
1.07 |
1.10 |
|
|
Melt Index (200°C/5KG) |
|
g/10min |
4 |
6 |
18 |
25 |
6 |
8 |
|
|
Tensile Properties |
Strength |
|
kg/cm² |
240 |
240 |
220 |
230 |
320 |
250 |
|
Elongation |
% |
40 |
50 |
50 |
50 |
40 |
40 |
||
|
Flexural Properties |
Strength |
|
kg/cm² |
330 |
330 |
330 |
360 |
450 |
380 |
|
Modulus |
19,000 |
20,000 |
20,000 |
19,000 |
22,000 |
23,000 |
|||
|
Izod Impact Strength |
|
kg.cm/cm |
8.0 |
8.0 |
7.0 |
7.0 |
9.0 |
7.0 |
|
|
Heat Distortion Temp (1.197 KG) |
|
°C |
80 |
85 |
74 |
70 |
80 |
80 |
|
|
Ball Pressure Temp |
- |
°C |
80 |
85 |
80 |
80 |
85 |
85 |
|
|
Vicat Softening Point (0.923kg) |
ASTM - D1525 |
°C |
100 |
100 |
95 |
95 |
100 |
100 |
|
|
Flammability |
UL-94 |
1.9mm V0 |
1.5mm V0 |
1.5mm V2 |
2.5mm V0 |
1.5mm V2 |
1.4mm V2 |
||
|
APPLICATION |
- |
OA Equipments |
TV Housing |
Audio |
|||||
Click here
to view product in Acrobat format
NOTE : Figures presented above are typical laboratory averaged values.
For enquiries click here.
|
|
Data describe in this data sheet are representative figures obtain by measurement under specific conditions. |
|
|
Uses describe in this data sheet do not necessarily assure results of certain product applications. |
|
|
When using this product for application introduced in this data sheet, care should be taken not to infringe on industrial property rights. |
|
|
Information contained in this table is subject to change with or without notice. |
|
|
Burning characteristics describe for Idemitsu PS are derived from small scale experiments, and should not be used to evaluate the danger of resins in actual occurrence of fires. |
|
|
This product should be stored in a dry place out of direct sunlight, rain and excess humidity. |
|
|
Idemitsu PS is inflammable and should be handle and stored away from heat and flame. When this product burns, harmful gas may be generated. |
|
|
This product must not be used for medical equipment and packaging of medicine. If this product is to be used for packaging of medicine, please consult with your Idemitsu representative beforehand. |
|
|
All information furnished is in good faith, without warranty, representation, inducement or a license of any kind. No guarantee is given that Idemitsu PS's product will be suitable in purchaser's formulations or processes for any particular end uses. |
Copyright
© 2011 Petrochemicals (M) Sdn. Bhd.
Last modified: May 2, 2011